Quote Request
To create a customized quote, Klimagiel requires the following data:
- Material type: specify if you want the duct in metal or fabric.
Airflow and pressure: indicate the airflow and pressure of the air conditioning unit the duct will be connected to.
Installation height: the height at which the duct will be installed.
Length: the total length of the duct needed.
Drawing: a drawing (even a simple one) of the duct positioning inside the environment.
Environment type: during the ordering phase, it will be necessary to know the intended use (e.g. warehouse, offices, restaurant, swimming pool, factory) for an accurate study of the perforation and to guarantee maximum environmental comfort.
Yes, but a preliminary quote will be drawn up which must subsequently be revised with the actual and necessary data.
The timeframes for issuing quotes depend on the size of the project and the completeness of the data received.
Production and Delivery Times
About 2/3 weeks from receipt of the order.
About 3 weeks from receipt of the order.
About 3-4 weeks from receipt of the order.
About 2 weeks from receipt of the order.
At least 5 weeks from receipt of the order.
The dispatch date is indicative and is always reported on the order confirmation sent via email from amministrazione@klimagiel.it.
Timeframes depend on the destination. Indicatively:
Fabric ducts: 1-2 working days.
Metal ducts: 3-4 working days.
Klimagiel can communicate the material departure date and estimate the days for arrival at destination. For shipments abroad, it is almost impossible to give a certain delivery date. For metal ducts, the carrier will contact the customer directly to notify them of the delivery date.
Washing and Maintenance
Yes, it is possible by following our washing instructions or by sending the ducts to our headquarters to take advantage of our washing service
Yes, but only by hand, following the specific washing instructions
By sending an email request to our address klimagiel@klimagiel.it
The cost is € 18.50/kg (weighed dirty). In cases of exceptional dirt requiring multiple washing cycles, the final cost can only be specified upon completion.
Technical Specifications
Polyester: from -12°C to +60°C.
Fiberglass: from 0°C to +120°C.
From +12/15°C to +60°C.
Klimagiel communicates the necessary pressure at the duct inlet based on the communicated temperatures, the installation height, and the desired air throw.
No, our ducts are suitable for indoor use only
No, determining the cubic meters of air to distribute in the room is the task of a thermal engineer. Klimagiel will size the duct based on the airflow rate communicated to us.
Yes, all certifications can be consulted on our website. (Remember to insert the link to the certifications page here).
Colors and Materials
At the time of creating the quote, we always attach the color chart to allow the customer to choose their preferred one.
We offer two possibilities:
5 standard pre-painted colors: RAL 9010 (white), RAL 9006 (grey), RAL 9005 (black), RAL 7016 (anthracite grey), RAL 5010 (blue).
Custom painting: in any color from the RAL Classic scale
Shipping and Packaging
Metal ducts: are packed on pallets (both open and closed versions) and protected with bubble wrap and protective film to ensure stability during transport.
Fabric ducts: are packed in cardboard boxes, protected internally by a plastic sheet.
We provide an estimate of the number of packages based on the material:
Metal ducts: we indicate an estimate of the pallets.
Fabric ducts: we communicate an indicative number of boxes or pallets in case of bulky orders.
Yes. Metal ducts are produced by default in "open mode" to be easily assembled on site. In this mode, the ducts are inserted one inside the other, considerably reducing the shipment volume and thus saving on transport costs.
Accessories and Prices
Metal ducts: yes, the junction collar, mounting kit, and cap are included and provided by default, unless otherwise specified.
Fabric ducts: yes, the suspension accessories are included in the price and provided by default, with the exception of the aluminum profile and the plastic profile, which are quoted separately
No, as we cannot know the type of structure (wall, beam, etc.) onto which our duct will be hooked.
Klimagiel produces custom-made ducts, so the price depends on diameter, length, material used, and other factors. To get a precise quote, we ask you to contact us at the address klimagiel@klimagiel.it.
Contacts and Assistance
All our customers can contact us via phone at +39 045 916672 or via email at the address klimagiel@klimagiel.it.
Yes, all our customers are assigned a dedicated contact person with whom they can discuss any needs.
Discover the applications and our Case Studies
Discover how Klimagiel has revolutionized the world of air diffusion and find out which companies have chosen our solutions.